Why Are My Headphones Always Breaking?

Similar to a lot of other consumer electronics, headphones are fragile equipment. Since they are neither water-proof, shock-proof, nor even dummy-proof, you must handle them cautiously.

In contrast to robust wireless earphones, wired headphones are incredibly brittle. It is in our best interest to take good care of them because the best of them are also quite pricey.

Sadly, we will all experience headphones breaking at some point in our lives. Although it is out of our control, if you believe that your headphones—even high-quality ones—are breaking too often, it's most likely due to improper treatment that you are unaware of.

You can read this article here to find out how long a headphone should endure.

How come your headphones are always breaking?

Although there are a number of causes for headphones to break easily, human damage to the cord is the main culprit. Without your knowledge, the headphones could be harmed for a number of different reasons. In the next parts, we shall cover a number of connected subjects.

Things That Damage Headphones' Body and Internal Components

Though this is not to argue that TWS earbuds are faultless, I feel that headphones are more likely to sustain physical harm than earbuds. While earbuds are not without issues, headphones are more likely to break because of their design and contact with the outside world. They are also larger.

Don't be concerned about this if you are. Because they provide superior noise isolation, richer sound quality, and longer battery life than earbuds, headphones are still incredibly adaptable.

1.Sweat and moisture exposure

Although the majority of contemporary headphones are water-resistant, this does not imply that they are "water-proof." Therefore, you cannot now take a shower and listen to music just because you purchased a pair of high-quality headphones.

Now, headphones that are sweat- or water-resistant do offer some water protection. The majority of popular headphones have an IPX4 rating, which indicates that they can withstand minor spills from any angle. You may wear them while exercising or strolling in light rain, thanks to their IPX4 rating. If it gets any larger than that, you should prepare for an early retirement with your headphones.

As previously stated, headphones are more susceptible to external factors than earbuds. Therefore, I advise exercising extra caution or "singing in the rain" if you are a frequent user of headphones.

2.Using headphones while you sleep

I discovered the hard way that you should never wear headphones to sleep, or at the very least, keep them close at hand if you use a headphone stand. You'll not only toss and turn when you sleep, but you'll also unknowingly crush the headphones by twisting and turning them.

The majority of low-end headphones with weak construction are susceptible to this flaw. That being said, you shouldn't sleep with your expensive, well-made headphones on your bed. Even expensive, "stronger" headphones can sustain internal damage that eventually causes them to sound terrible.

Earbuds are superior to headphones in situations where you keep them on your bed. Depending on the type, you can toss and turn in bed with comfort, especially if you have wireless headphones. The earbuds' ability to sense pressure on your pillow and interpret it as a touch button to pause music or switch songs is the lone drawback.

Several Actions That Harm the Headphone Cord

While sleeping with headphones on or immersing them in water may harm them, these are not the most frequent issues that users of headphones encounter.

Broken headphones are typically the result of problems with the aux cord. There are numerous instances in which the aux cord gradually deteriorates over regular use without your knowledge.

The sound quality will begin to deteriorate when the aux cord is repeatedly damaged on a daily basis, and you will be able to recognize signs like:

Faint humming or buzzing sounds.

As the cord moves, the sound fades away.

The headphones are beginning to break on one side.

Even though this might not apply to you if you have wired or wireless headphones, it's still helpful to know how to properly care for your headphones to prevent further damage to the aux cord.

1.Ignoring the fact that your headphones are perched atop your head

Either our headphones are exceptionally comfy and ergonomic, or people's minds can easily ignore something their bodies are forced to wear for extended periods of time.

In any case, we have all had the experience of forgetting that our headphones are on our heads while we are using our laptops or playing games. as soon as an issue arises in the actual world. When the headphone jack tried to rip itself out of the audio port, we would sit up from our chairs and rush out of the room.

Unless you were using a less expensive headset, this kind of scenario doesn't immediately destroy the aux cord. Rather, it damages it over time if you don't learn to take hints. Your headphones will eventually break from the force on the cord.

But if you have wireless headphones or learn to remain composed and not run outside in the middle of an emergency, you can prevent this kind of situation.

2.Making knots out of the string

If you've experienced problems with the aux cord twisting and tangling the moment you put it in your pocket, you may have searched for ways to lessen this problem.

There are some really cool hacks out there; some are more simple and require some really intricate knots, while others incorporate unique devices.

These are really great, but you have to be cautious not to tighten them too much since, over time, they will harm the aux cord in the same way that they would if you pulled them out of the audio port.

Go completely cordless, or use a separate carrying case for your headphones or earbuds if you're concerned about the cables getting tangled.

3.Drawing from the wire rather than the headphone jack or connector

This is something that I also do. It's simple to disconnect from your phone or computer by yanking the aux cord rather than the plug that connects the headphone port to the cord. But it overstresses the cord, and similarly to the first two scenarios, it gradually wears down the aux cable.

Rather than just pulling the aux cable out of the port, I suggest that you practice disconnecting it from the outlet. It will become automatic with sufficient practice.

These are only a handful of the most frequent problems with cables that might cause your headphones to malfunction. In addition to these, I advise you to treat the cable well and avoid pulling or overstressing it.

Avoid hanging your headphones by their cable, trip over it, and stretch out the connections. If you won't be using your headphones for an extended period of time, carry them in a case or unplug the aux wire.

Conclusion

Earbuds are inferior to headphones. They have superior sound quality and are highly effective at noise suppression. Nonetheless, it is the user's duty to take proper care of them, as they are highly vulnerable to damage. A user can extend the life of the headphones without breaking them repeatedly if they treat the wires with care and adhere to the IP rating.